Penetrol 10L

Description
Penetrol is an air-drying, film forming, deeply penetrating mixture of natural oils. It
does not contain linseed or fish oil, has a low odour and is non-toxic when dry. With
a penetrating power 3 times that of water it goes deep into the substrate and forms a
strong bond for subsequent topcoats.
Purpose
Penetrol stops paint form peeling, cracking, and flaking; increases paint flow and
levelling. It brings life back to faded wood stains, rejuvenates old dull plastics and
fibreglass, and makes paint stick to almost anything. Penetrol stops and prevents
rust, corrosion and oxidisation. It can be used in confined and damp areas and
reduces fire and fume hazards. Withstands temperatures of over 100°C.
Application
Apply Penetrol by brush, roller, cloth pad or spray.
Drying Time
4 - 6 hours on non-porous surfaces (steel); 2 - 4 hours on porous surfaces (timber)
Container Size
Penetrol is available in 300g aerosol, 500mls, 1, 4, 10 and 20 litre containers.
Coverage
Penetrol will cover from 4 -12 sq meters per litre depending on surface porosity. On
old timber coverage may be as low as 2 sq metres per litre.
Clean-up
Clean equipment and spills with mineral turpentine. Remove dried spatter or spills
with a suitable paint remover. Always check for surface compatibility first.
Safety Directions
Follow common sense painting procedures. Wear protective glasses and gloves. If in
eyes or on skin, wash with copious amounts of water and seek medical attention if
irritation persists.
Waste Disposal
Used rags saturated with Penetrol may be subject to spontaneous combustion when
discarded. Always unfold and allow rags to dry before disposal in accordance with
local regulations.